Operator's Guide 305
ESC [ (n) u Set Horizontal Tab at Column n
4
ASCII
: ESC [ (n) u
Control
:
CTRL
[[ (n) u
Decimal
: 27 91 (n) 117
Hexadecimal
:1B5B(n)75
Adds a horizontal tab at Column n.
ESC [ (n1) ; (n2) ; ...(n16) u Set Multiple Horizontal Tabs
§
ASCII
: ESC [ (n1) ; (n2) ; ...(n16) u
Control
:
CTRL
[ [ (n1) ; (n2) ; ...(n16) u
Decimal
: 27 91 (n1) 59 (n2) 59 ...(n16) 117
Hexadecimal
: 1B 5B (n1) 3B (n2) 3B ...(n16) 75
Adds multiple horizontal tabs at Columns n1, n2, etc. A maximum of 16
horizontal tabs may be set with one command.
ESC 2 or ESC [ 2 g or ESC [ 3 g Clear All Horizontal Tabs
§
ASCII
: ESC 2
Control
:
CTRL
[2
Decimal
:27 50
Hexadecimal
:1B 32
ASCII: ESC [ 2 g
Control:
CTRL
[[ 2 g
Decimal: 27 91 50 103
Hexadecimal: 1B 5B 32 67
ASCII
: ESC [ 3 g
Control
:
CTRL
[[ 3 g
Decimal
:279151103
Hexadecimal
:1B5B3367
Clears all previously set horizontal tabs. All three control commands
perform the same function.
4
Changing horizontal character pitch also changes the physical position of tab stops. These commands only set
or clear the tabs. The Horizontal Tab control code, HT, causes the active column to advance to subsequent
tab positions.
Selecting or cancelling font pitches, changing the print quality to draft or NLQ, or changing the print area also
changes the physical position of the tabs.
To Next Page
Loading...
Need help?
General