Epson PowerLite 4100 - Page 332

A-4 Appendix A—Specifications
CHARACTERISTICS, CONTINUED
Paper Feed, continued
Paper Handling
Capacity
Total thickness must not exceed 0.018 in. (0.46 mm), based on
following requirements. (See "Paper" Requirements.)
Single-Part Paper:
Width
3.0 to 16.0 in.
Bond Weight
14 to 28 lb
(52 to 105
g/m
2
)
Multipart-Part
Paper:
(Each Sheet)
3.0 to 16.0 in. 11 to 21 lb
*
(40 to 80 g/m
2
)
Label Handling
Capacity
Total thickness: must not exceed 0.007 in. (0.18 mm), based on
width range of 3.0 to 16.0 in., with no trimming. (See "Label"
Requirements.)
Line Spacing
(Vertical Pitch, in
Lines / In.)
• Menu Selectable: 6 to 8 lpi.
• Universal control Commands: 144 to 144/170 lpi.
• Epson/IBM Control Commands: 216 to 216/255 lpi.
• DEC Control Commands: 2, 3, 4, 6, 8, or 12 lpi.
Line Feed
Increments
• Switch Panel.
1
/
6
in.,
1
/
8
in.,
1
/
144
in.
• Universal Control Commands.
n
/
144
in., n = 1 to 170
• Epson/IBM Control Commands:
n
/
216
in., n = 1 to 255
• DEC Control Commands.
1
/
2
,
1
/
3
,
1
/
4
,
1
/
6
,
1
/
8
,
1
/
12
in.
*
Varies among first, middle, and last parts.