Epson PowerLite 4100 - Page 448

E-22 Appendix E—Barcodes
Parameter Options Setting
P1: Barcode Type 0 Interleaved 2 of 5
(See Note 1) 1 PostNet (Graphics Mode)
4 Code 39 (default)
5 EAN - 8
6 EAN - 13
9 Codabar a/a
10 Codabar b/b
11 Codabar c/c
12 Codabar d/d
13 UPC - A
14 UPC - E
21 PostNet (Text Mode)
P2: Barcode Height 0 3/4 in. (default)
n n/12 in. (n = 1 to 120)
P3: Human Readable Line 0 Disable
1 Enable (default)
P4: Narrow Bar Width 0 or 1 .014 in. (default)
2 .027 in.
n .014 + .0133
*
(n-1) in.*
P5: Wide Bar Width 1 .014 in.
2 .027 in.
0 or 3 .040 in. (default)
4 .054 in.
n .014 + .0133
*
(n-1) in.*
P6: Narrow Space Width 0 or 1 .014 in. (default)
2 .027 in.
n .014 + .0133
*
(n-1) in.*
P7: Wide Space Width 1 .014 in.
2 .027 in.
0 or 3 .040 in. (default)
4 .054 in.
n .014 + .0133
*
(n-1) in.*
P8: Intercharacter Gap 0 or 1 .014 in. (default)
(See Note 2) 2 .027 in.
n .014 + .0133
*
(n-1) in.*
Note
: 1. Codabar a/a, b/b, and so forth refer to start and stop characters
.
2. Intercharacter gap is adjustable only for Code 39 and Codabar barcode
symbols.
*
For n
≠
0.