36 Operations
HELP OPTIONS
2. Respond by pressing
YES
.
The printer prints out:
Status Print ?
3. Press
NEXT
.
The printer prints out:
Menu Tree ?
4. Again, press
NEXT
.
•
•
5. Continue pressing
NEXT •
•
•
until the printer prints :
•
Print Active Character Set ?
6. Then, press
YES
.
The printer moves to the top of the next form and then prints the active
character set.
The illustrations on the following pages show the draft mode factory-
default character sets for the Epson FX-100, IBM Proprinter XL, and DEC
LA210 emulations. (Examples are shown smaller than actual size.) In
these printouts, the first hexadecimal digit of the character or control code
is written along the top of the table, and the second hexadecimal digit is
written along the side. Thus, the hexadecimal control code for a capital
To Next Page
Loading...
