Operator's Guide 77
Each emulation has a default character set. The factory default character
sets for the 4100 printer are English-language U.S.A. The factory default
U.S. Epson, IBM, and DEC character sets are illustrated on Pages 39
through 43. If desired, you may map over the U.S. English characters
with French, Swedish, U.K. English, Multilingual characters, and so on,
depending on the emulation.
Note
: The factory default emulation is Epson FX-100, therefore, the
character set in effect when you turn on the printer for the first time
is the U.S. Epson Character Set. If you then switch, for example,
to the IBM Proprinter XL emulation as your default emulation, then
the U.S. IBM #1 Character Set is in effect when the printer is turned
on.
Besides the character options available within an emulation, you can also
overlay parts of the active language-biased character set with optical
character recognition (OCR) characters. You can even overlay particular
character set characters with your own characters downloaded from the
computer using universal control commands.
To check out the active character and control code assignments, use the
"Print Active Character Set" menu selection (Page 36).
Epson Character Options
Pressing
YES
prints out the first of the Epson character options listed
below:
•
Epson Control Code Map
•
•
Epson Character Map
•
Epson IBM #1
•
Epson IBM #2
An Epson FX-100 printer contains a basic or native character set plus two
variations of IBM character sets: Epson, Epson IBM #1, and Epson IBM
To Next Page
Loading...
Need help?
General