Epson Stylus Pro 4450 - Print Menu Item; Adjustment Parameter Print Sample

EPSON Stylus Pro 4400/4450/4800/4880/4880C Revision C
Product Description Operating Panel 100
Figure 1-24. Adjustment Parameter Print Sample
Table 1-43. Print Menu Item
Print menu Item
Test pattern Nozzle ink eject check pattern
Vertical nozzle arraignment
check pattern
Horizontal nozzle arraignment
check pattern
Uni-D adjustment
Bi-D adjustment (PG1.2mm
VSD1 to 3)
Bi-D adjustment (PG0.7mm
VSD1 to 3)
Adjustment
parameter
The adjusted parameters are printed. (Refer to Figure 1-22.)
[R4CD400 xColoros] Adjust Parameter
Serial No. : _______________ , Mecha No. : ---------- , Tool Version : xxxxxxx
Belt No. : xxx , PC No. : xx
xx-xx-xxxx xx:xx:xx
F/W Version : A0xxxx.xxxx
NVRAM Version : Main xxxx xxxx ,Mecha xxxx xxxx
Type-B : Uninstalled
Head Rank ID : xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
ColorID:xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
xx xx xx
xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
xx xx xx
Gap Parameter 4Colors ---------- User Area ---------- ---------- Backup Area -------------
VSD1 C C2 Y Y2 M M2 MK MK2 C C2 Y Y2 M M2 MK MK2
Bi-D PG 0.7mm : xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
Bi-D PG 1.2mm : xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
Bi-D PG 1.5mm : xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
Bi-D PG 2.1mm : xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
Bi-D PG 2.6mm : xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
Uni-D : xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
VSD2 C C2 Y Y2 M M2 MK MK2 C C2 Y Y2 M M2 MK MK2
Bi-D PG 0.7mm : xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
Bi-D PG 1.2mm : xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
Bi-D PG 1.5mm : xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
Bi-D PG 2.1mm : xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
Bi-D PG 2.6mm : xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
Uni-D : xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
VSD3 C C2 Y Y2 M M2 MK MK2 C C2 Y Y2 M M2 MK MK2
Bi-D PG 0.7mm : xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
Bi-D PG 1.2mm : xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
Bi-D PG 1.5mm : xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
Bi-D PG 2.1mm : xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
Bi-D PG 2.6mm : xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
Uni-D : xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
PF Adjust : 1002.349 mm Bi-D PF Adjust : -1
Top Margin Adjust : 8.903 mm Rear Sensor Position Adjust : 13.099 mm Multi Sensor Left : 0.000 mm
Bottom Margin Adjust: 13.602 mm ASF Top Margin : 10.300 mm Multi Sensor Right : 0.000 mm
Side Margin Adjust : 9.895 mm ASF Side Margin : 8.696 mm
PG Adjust = 45 Pump Counter = 11390 Cut Paper Pre. = 100 % Cut Pressure = 70 % Rear AD =C6
Platen Position 1:0 / 2:0 / 3:0 / 4:0 / 5:0 / 6:0 / 7:0 / 8:0 / 9:0 / 10:0
Multi-Sensor Position Adjust PG 0.7mm PG 1.2mm PG 1.5mm PG 2.1mm PG 2.6mm
Horizontal [mm] : 0.0 0.0 0.0 0.0 0.0
Vertical [mm] : 0.0 0.0 0.0 0.0 0.0
Error 1 : xxxxxxxx xx-xx-xx xx:xx:xx Error 6 : xxxxxxxx xx-xx-xx xx:xx:xx
Error 2 : xxxxxxxx xx-xx-xx xx:xx:xx Error 7 : xxxxxxxx xx-xx-xx xx:xx:xx
Error 3 : xxxxxxxx xx-xx-xx xx:xx:xx Error 8 : xxxxxxxx xx-xx-xx xx:xx:xx
Error 4 : xxxxxxxx xx-xx-xx xx:xx:xx Error 9 : xxxxxxxx xx-xx-xx xx:xx:xx
Error 5 : xxxxxxxx xx-xx-xx xx:xx:xx Error 10 : xxxxxxxx xx-xx-xx xx:xx:xx
Serial No. : xx xx xx xx xx xx xx xx xx xx
USB Serial No. : xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
IEEE1394 ID : xx xx xx xx xx
Factory Flag : xx xx xx xx xx xx xx xx