Epson Stylus Pro 4450 - Initial Ink Charge Flag ON;OFF; Initial Ink Chrge Flag ON;OFF Screen

EPSON Stylus Pro 4400/4450/4800/4880/4880C Revision C
Adjustment Basic Adjustment 408
5.3.15 Initial Ink charge flag ON/OFF
 Procedure
1. Enter Maintenance Mode 2.
Power off → Press "Paper Source (<)" + "Paper Feed (Δ)" + "Paper
Feed (∇)" →Power on
2. Start the adjustment program and select [Initial Ink chrge flag ON/
OFF].
3. Select "ON" or "OFF" and click the [Run] button.
4. Click the [Finish] button.
Figure 5-52. Initial Ink Chrge Flag ON/OFF Screen