Epson Stylus Pro 4450 - 1000 Mm Feed Adjustment; 1000 Mm Feed Adjustment Pattern; 1000 Mm Feed Adjustment Screen

EPSON Stylus Pro 4400/4450/4800/4880/4880C Revision C
Adjustment Basic Adjustment 407
5.3.14 1000mm Feed Adjustment
 Paper Used
 Size: 17"
 Type: Enhanced Matte Roll Paper
 Procedure
1. Turn the printer on.
2. Start the adjustment program and select [1000mm Feed Adjustment].
3. Click the [Print] button and the adjustment pattern will be printed.
4. Use a ruler (1000mm) and scale stopper to measure the distance
shown by Figure 5-51.
5. Input the measured value into [1000mm Feed] and click the [Write]
button.
6. Click the [Finish] button.
Figure 5-50. 1000mm Feed Adjustment Screen
Figure 5-51. 1000mm Feed Adjustment Pattern
C H E C K
P O I N T
The ruled line in the center of the adjustment pattern is used
as a guide when measuring with the ruler.
Measurement