Epson Stylus Pro 4450 - Check Pattern

EPSON Stylus Pro 4400/4450/4800/4880/4880C Revision C
Adjustment Basic Adjustment 406
 Check Procedure
1. Click the [Check] button to print the check pattern.
2. Refer to Figure 5-49 and check the positions of the printed adjustment
line and the platen tab. If there is no slip, click the [Finish] button.
If the position has slipped, click the [Back] button to perform
adjustment again.
Figure 5-48. Platen Position Adjustment Screen (2)
Figure 5-49. Check Pattern
OK NG