Epson Stylus Pro 4450 - Release Unit; Cover, Inner, Release Removal; Plate, P Cover, Right Removal; Paper Feed Mechanism

EPSON Stylus Pro 4400/4450/4800/4880/4880C Revision C
Disassembly & Assembly Disassembly Procedures 343
4.2.9 Paper Feed Mechanism
4.2.9.1 Release Unit
1. Remove "Cover, Rear" (p223).
2. Remove the screw securing "Cover, Inner, Release".
(Refer to Figure 4-197.)
 C.B.S. 3x8: 1 pc.
3. Slide "Cover, Inner, Release" to right side, free the two ribs and remove it
upward. (Refer to Figure 4-197.)
4. Remove the two screws securing "Plate, P Cover, Right" and remove
"Plate, P Cover, Right". (Refer to Figure 4-198.)
 C.B.S. 3x6: 2 pcs.
Figure 4-197. Cover, Inner, Release Removal
Figure 4-198. Plate, P Cover, Right Removal
.
Align "Plate, P Cover, Right" dowel with main frame
positioning hole.
Dowel
Positioning Hole
Cover, Inner, Release
Ribs
C.B.S. 3x8
Plate, P Cover, Right
C.B.S. 3x6