Epson Stylus Pro 4450 - User Paper Setting Printing

EPSON Stylus Pro 4400/4450/4800/4880/4880C Revision C
Product Description Operating Panel 65
1.4.4.22 User Paper Setting Printing
With this mode, users print information registered in user paper setting menu.
It prints User Paper Setting Printing with following specifications;
 Print paper size: A4
 Font: Built-in font (Print all in alphanumeric characters)
 Print sample: Refer to right column figure.
Figure 1-21. User Paper Setting Printing
Paper No.1
Custom Name : XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Platen Gap : Standard Drying Time : 10.0 sec Suction : Standard
Cut Method : ThickPaperFast Eject Roller : RollCurled M/W Adj. :
Standard
Ppr Thick. : 0.2mm Ppr Feed Adj. : -0.70 %
Paper No.2
Custom Name : XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Platen Gap : Standard Drying Time : 10.0 sec Suction : Standard
Cut Method : ThickPaperFast Eject Roller : RollCurled M/W Adj. :
Standard
Ppr Thick. : 0.2mm Ppr Feed Adj. : -0.70 %
Paper No.3
Custom Name : XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Platen Gap : Standard Drying Time : 10.0 sec Suction : Standard
Cut Method : ThickPaperFast Eject Roller : RollCurled M/W Adj. :
Standard
Ppr Thick. : 0.2mm Ppr Feed Adj. : -0.70 %
Paper No.4
Custom Name : XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Platen Gap : Standard Drying Time : 10.0 sec Suction : Standard
Cut Method : ThickPaperFast Eject Roller : RollCurled M/W Adj. :
Standard
Ppr Thick. : 0.2mm Ppr Feed Adj. : -0.70 %
Paper No.5
Custom Name : XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Platen Gap : Standard Drying Time : 10.0 sec Suction : Standard
Cut Method : ThickPaperFast Eject Roller : RollCurled M/W Adj. :
Standard
Ppr Thick. : 0.2mm Ppr Feed Adj. : -0.70 %
Paper No.6
Custom Name : XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Platen Gap : Standard Drying Time : 10.0 sec Suction : Standard
Cut Method : ThickPaperFast Eject Roller : RollCurled M/W Adj. :
Standard
Ppr Thick. : 0.2mm Ppr Feed Adj. : -0.70 %
Paper No.7
Custom Name : XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Platen Gap : Standard Drying Time : 10.0 sec Suction : Standard
Cut Method : ThickPaperFast Eject Roller : RollCurled M/W Adj. :
Standard
Ppr Thick. : 0.2mm Ppr Feed Adj. : -0.70 %
Paper No.8
Custom Name : XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Platen Gap : Standard Drying Time : 10.0 sec Suction : Standard
Cut Method : ThickPaperFast Eject Roller : RollCurled M/W Adj. :
Standard
Ppr Thick. : 0.2mm Ppr Feed Adj. : -0.70 %
Paper No.9
Custom Name : XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Platen Gap : Standard Drying Time : 10.0 sec Suction : Standard
Cut Method : ThickPaperFast Eject Roller : RollCurled M/W Adj. :
Standard
Ppr Thick. : 0.2mm Ppr Feed Adj. : -0.70 %
Paper No.10
Custom Name : XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Platen Gap : Standard Drying Time : 10.0 sec Suction : Standard
Cut Method : ThickPaperFast Eject Roller : RollCurled M/W Adj. :
Standard
Ppr Thick. : 0.2mm Ppr Feed Adj. : -0.70 %