Epson Stylus Pro 4450 - Checking the Dots Position

EPSON Stylus Pro 4400/4450/4800/4880/4880C Revision C
Adjustment Basic Adjustment 400
14. Check if the dots of each nozzle line are positioned as shown in Figure
5-38.
15. Click [Next] twice to go back to Screen4, then click [Run]. The
"Carriage Unit" moves to its home position and the paper is reeled off.
Click [Finish] to finish the adjustment.
Figure 5-38. Checking the Dots Position
Cyan
Light Cyan
Cyan
1/3
1/3
1/3
Paper feed
direction