Epson Stylus Pro 4450 - Connectors;Harnesses Connected to C593_SUB Board; C593_SUB Board Removal

EPSON Stylus Pro 4400/4450/4800/4880/4880C Revision C
Disassembly & Assembly Disassembly Procedures 235
4. Disconnect all connectors/harnesses on the "C593_SUB Board".
(Refer to Figure 4-43.)
5. Remove the screw securing "C593_SUB Board" and then remove
"C593_SUB Board". (Refer to Figure 4-43.)
 C.B.P. 3x8: 1 pc.
Figure 4-43. C593_SUB Board Removal
Table 4-6. Connectors/Harnesses Connected to C593_SUB Board
Connector
No.
Color
Number
of Pins
Connection Socket
CN1 - 30 C593_SUB-D Board (CN4)
CN2 White 2 Cutter Solenoid
CN3 White 5 Multi Sensor
CN4 - 5 CR Encoder Board
Be sure to fasten both the grounding plate and the
"C593_SUB Board" together with screws.
Grounding Plate
C.B.S. 3x8
C593_SUB Board
Harnesses
Connector
Connector