Epson Stylus Pro 4450 - Print Adjustment Check Pattern; Print Adjustment Check Pattern Screen

EPSON Stylus Pro 4400/4450/4800/4880/4880C Revision C
Adjustment Check Results 438
5.5.3 Print Adjustment Check Pattern
This prints all of the adjustment patterns and the adjustment parameters stored
in the printer.
 Paper Used
 Size: 17"
 Type: Enhanced Matte Rool Paper
 Procedure
1. Turn the printer on.
2. Start the adjustment program and select [Print Adjustment Check
Pattern].
3. Select [Print All Pattern] or [Print Variables] and then click the [Print]
button, and the following patterns will be printed.
z Print All Pattern
All the adjustment patterns and the adjustment parameters will be
printed.
z Print Variables
The adjustment parameters stored in the printer will be printed.
4. Check the printed patterns and click the [Finish] button.
Figure 5-97. Print Adjustment Check Pattern Screen
C A U T I O N
Approximately 3.6m of roll paper will be needed when
printing all patterns. Be careful about the amount of
remaining paper and also about the eject space needed
since the paper will be continuously printed without being
cut.