Epson Stylus Pro 4450 - Skew Check; Skew Check Screen

EPSON Stylus Pro 4400/4450/4800/4880/4880C Revision C
Adjustment Basic Adjustment 404
5.3.12 Skew Check
 Paper Used
 Size: 17"
 Type: Enhanced Matte Roll Paper
 Procedure
1. Turn the printer on.
2. Start the adjustment program and select [Skew Check].
3. When the [Run] button is clicked, the paper will be ejected and the
paper skew amount will be measured by the Multi Sensor.
4. After the skew check value is displayed, click the [OK] button.
5. Click the [Finish] button and properly set the paper.
Figure 5-45. Skew Check Screen
C A U T I O N
Approximately 1m of paper will be ejected, so be aware of
the space needed for paper ejection.