Epson Stylus Pro 4450 - Mount Plate, Motor, ASF Unit

EPSON Stylus Pro 4400/4450/4800/4880/4880C Revision C
Maintenance Lubrication 456
Figure 6-19. Lever, lock, PG
Figure 6-20. Mount Plate, Motor, ASF Unit
• Lubrication Point
End part of "Lever, lock, PG"
• Lubrication Type
G-26
• Lubrication Amount
Φ1mm x approximately 3mm
•Remarks
Use a syringe/needle (JIS 17# or
equivalent) for application.
Wipe out lubricant with a dry cloth to
make the end part slightly coated with
lubricant.
• Lubrication Point
Lever, hole, and shaft parts of "Mount
Plate, Motor, ASF Unit"
• Lubrication Type
G-26
• Lubrication Amount
1. Φ1mm x 2mm
2. Φ1mm x 1perimeter
3. Φ1mm x 15mm
•Remarks
Use a syringe/needle (JIS 17# or
equivalent) for application.
1
2
3