EPSON Stylus Pro 4400/4450/4800/4880/4880C Revision C
Adjustment Basic Adjustment 427
ADJUSTMENT PROCEDURE (SEPARATE WORKFLOW)
Printing Calibration Chart (at repair work site)
1. Turn the printer power on.
2. Start the adjustment program and select [Colorimetric Calibration Tool].
3. Click [Run] to start “Colorimetric Calibration Tool”.
4. Click [Print Calibration Chart].
5. Perform Step 5 through 12 of "Adjustment Procedure (Entire Process
Workflow)" to print the Calibration chart.
6. Lay one plain paper on the print surface of the Calibration chart, put them
in a clear file together with the alignment check pattern, and send them to
a place where the color measuring is carried out.
Figure 5-79. Printing Calibration Chart
C A U T I O N
The printed calibration charts should be sent to a color-
measuring site immediately, as the color of the patch may be
discolored in a week.
To Next Page
Loading...
