Epson Stylus Pro 4450 - Holder, Edge Guide, Left Removal; Roller Assy., LD, Left Removal

EPSON Stylus Pro 4400/4450/4800/4880/4880C Revision C
Disassembly & Assembly Disassembly Procedures 257
6. Detach the resin plate that is attached on the "Holder, Edge Guide, Left",
release the tab that secures "Holder, Edge Guide, Left" to the "Cover,
Roller, LD, Left", and then remove the "Holder, Edge Guide, Left" to the
right. (Refer to Figure 4-67.)
7. Release the tab that secures the "Roller Assy., LD, Left" to the "Cover,
Roller, LD, Left", then remove the "Roller Assy., LD, Left" sliding it
rightward. (Refer to Figure 4-68.)
Figure 4-67. Holder, Edge Guide, Left Removal
Figure 4-68. Roller Assy., LD, Left Removal
Holder, Edge Guide, Left
Holder, Edge Guide, Left
Tabs
Resin Plate
Tab