Epson Stylus Pro 4450 - Screws Securing ASF Unit

EPSON Stylus Pro 4400/4450/4800/4880/4880C Revision C
Disassembly & Assembly Disassembly Procedures 251
10. Remove the two screws that secure the "ASF Unit" on the right side of the
printer and the two screws that secure "Duct, Air, C, Assy".
 C.B.S. 3x6: 4 pcs.
11. Remove the two screws that secure the "ASF Unit" while keeping the
"Duct, Air, C, Assy" separated.
 C.B.S. 3x6: 2 pcs.
Figure 4-59. Screws Securing "ASF Unit"
C A U T I O N
When performing the following work, do not keep the "Duct,
Air, C, Assy" too far from the printer because harnesses are
connected between them.
Step 11
C.B.S. 3x6
Step 10
C.B.S. 3x6