Epson Stylus Pro 4450 - Slider, CR Lock

EPSON Stylus Pro 4400/4450/4800/4880/4880C Revision C
Maintenance Lubrication 452
Figure 6-3. Slider, CR Lock(No.1)
Figure 6-4. Slider, CR Lock(No.2)
Figure 6-5. Slider, CR Lock(No.3)j
Figure 6-6. Slider, CR Lock(No.4)
• Lubrication Point
Applies on the ribs on the front and
back sides of "Slider, CR Lock".
(4 places in total)
• Lubrication Type
G-74
•Remarks
Use a brush or cotton swab for
application.
• Lubrication Point
Head rib of "Slider, CR Lock"
• Lubrication Type
G-74
•Remarks
Use a brush or cotton swab for
application.
Applies along the rim
indicated in yellow.
Applies along the part
indicated in red.
Applies on the part
indicated in red.
• Lubrication Point
Ribs on the front and back sides of
"Slider, CR Lock" (4 places)
• Lubrication Type
G-74
• Remarks
Use a brush or cotton swab for
application.
• Lubrication Point
Ribs on front and back sides of "Slider,
CR Lock" (2 places)
• Lubrication Type
G-74
• Remarks
Use a brush or cotton swab for
application.
Applies along the part indicated in
red.(4places)
Applies along the part indicated in
red.(2places)