Epson Stylus Pro 4450 - Routing on the Duct, Air, C

EPSON Stylus Pro 4400/4450/4800/4880/4880C Revision C
Disassembly & Assembly Disassembly Procedures 361
Routing on the "Duct, Air, C"
 Route the harness via the tabs on the "Duct, Air, C"
Figure 4-229. Routing on Duct, Air, C_1
 Bundle the harnesses and secure them to the shaft shown in the figure
below with a cable tie.
 Secure the harnesses with the clamp on the "Duct, Air, C".
Figure 4-230. Routing on Duct, Air, C_2
Tabs
Tabs
C A U T I O N
Be careful not to damage or cut the harnesses when cutting
the cable tie off.
Cable tie
Clamp