Epson Stylus Pro 4450 - Page 46

EPSON Stylus Pro 4400/4450/4800/4880/4880C Revision C
Product Description Operating Panel 46
Printer status menu
(PRINTER STATUS)
Consumable Life
Cutter life
SERVICE LIFE
CUTTER XXXXXXX
(E* F, E** F, E*** F, E****F, E*****F)
p.70
CR motor life
CR MOTOR XXXXXXX
(0%, nn%, E* F, E** F, E*** F, E****F, E*****F))
p.70
PF motor life
PF MOTOR XXXXXXX
(E* F, E** F, E*** F, E**** F, E*****F)
p.71
Head unit life
HEAD UNIT XXXXXXX
(E* F, E** F, E*** F, E****F, E*****F)
p.71
Cleaning unit life
CLEANING UNIT XXXXXXX
(E* F, E** F, E*** F, E**** F, E*****F)
p.72
User Paper Setup Menu
(CUSTOM PAPER)
Paper Type Selection PAPER NUMBER STANDARD
, 1 ~ 10 p.72
PG setting PLATEN GAP NARROW, STANDARD
, WIDE, WIDER, WIDEST p.74
Paper Thickness Detection Pattern THICKNESS PAT PRINT
Select paper thickness number THICKNESS NUM 1 ~ 16
Cutting method CUT METHOD
STANDARD
THIN PAPER
THICK, FAST
THICK, SLOW
p.74
Paper feed adjustment PPR FEED ADJ -0.70% ~ 0%
~ 0.70% p.74
Eject paper roller setting EJECT ROLLER AUTO
, SHEET, ROLL CURLED, ROLL NORMAL p.74
Ink drying time (Pass delay) DRYING TIME 0.0sec
~ 10.0sec p.74
Paper suction SUCTION STANDARD,
-1, -2, -3, -4 p.74
MW print adjustment M/W ADJ STANDARD
, 1, 2 p.74
Maintenance menu
(MAINTENANCE)
Cutter Blade
Replacement
Execute sequence CUTTER REPL EXEC
p.79
Cover open OPEN TOP COVER –
Cutter replacement REPLACE CUTTER –
Cover close CLOSE TOP COVER –
K INK CHANGE Execute sequence BK INK CHANGE EXEC p.79
Power Cleaning POWER CLEANING EXEC p.79
Date Setting CLOCK SETTING MM/DD/YY HH:MM p.79
Gap Adjustment menu
(HEAD ALIGNMENT)
Paper thickness (in 0.1mm units) *
1
PAPER THKNS STD, 0.1mm ~ 1.5mm p.79
Select and print adjustment pattern ALIGNMENT AUTO
UNI-D
p.79
BI-D 2-COLOR
BI-D ALL
BI-D #1 *
1
BI-D #2 *
1
BI-D #3 *
1
Continued on next page
Table 1-26. Panel Setting Menu Item
Top menu
(Panel display)
Item menu Panel display Setup value (Underline: Default) Ref.