Epson TM-T88III

CONFIDENTIAL
Paper roll Character commands ESC !
Ver. 10.01 p. 109
TM-J2000/J2100
[Other than Japanese model]
Character configurations
Bit 0: Font 1 = Font A (alphanumeric and Katakana characters: 12 × 24 / Thai characters: 12 × 72)
Font 2 = Font B (alphanumeric and Katakana characters: 9 × 17 / Thai characters: 9 × 51)
Each character’s baseline is as follows:
Font A (12 × 24): 21 dots from the top of a character.
Font B (9 × 17): 16 dots from the top of a character.
[Japanese model]
Bit 0: Font 1 = Font A: 12 × 24
Font 2 = Font C: 8 × 16
Each character’s baseline is as follows:
Font A (12 × 24): 21 dots from the top of a character.
Font C (8 × 16): 15 dots from the top of a character.
Font B (12 × 24) can be selected by ESC M.
TM-T90
[Other than Japanese model]
Character configurations
Bit 0: Font 1 = Font A (alphanumeric and Katakana characters: 12 × 24 / Thai characters: 12 × 72)
Font 2 = Font B (alphanumeric and Katakana characters: 9 × 17 / Thai characters: 9 × 51)
Each character’s baseline is as follows:
Font A (12 × 24): 21 dots from the top of a character.
Font B (9 × 17): 16 dots from the top of a character.
[Japanese model]
Bit 0: Font 1 = Font A: 12 × 24
Font 2 = Font C: 8 × 16
Each character’s baseline is as follows:
Font A (12 × 24): 21 dots from the top of a character.
Font C (8 × 16): 15 dots from the top of a character.
• Font B (12 × 24) can be selected by ESC M.