Epson TM-T88III

CONFIDENTIAL
Paper roll Two-dimension code commands GS ( k
Ver. 10.01 p. 519
GS ( k <Function 068>
[Name] PDF417: Set the row height
[Format] ASCII GS ( k pL pH cn fn n
Hex 1D 28 6B 03 00 30 44 n
Decimal 2940107 3 0 48 68 n
[Range] ( pL + pH × 256) = 3 ( pL = 3, pH =0)
cn = 48
fn = 68
TM-T90, TM-L90:2 ≤ n ≤ 8
[Default] TM-T90, TM-L90: n = 3
[Description] Sets the row height for PDF417 to [ n × (the width of the module)].
[Notes]
■ Settings of this function affect the processing of Functions 081 and 082.
■ Settings of this function are effective until ESC @ is executed, the printer is reset, or the power is
turned off.
[Model-dependent variations] TM-T90, TM-L90
TM-T90
The module height influences the recognition rate of the symbol.
The module height is recommended to be set to 3-5 times the module width.
The recognition rate might decrease when the vertical size of the symbol is 5 mm {0.2"} or less.
The vertical size of the symbol can be confirmed by the transmission data of Function 082.
TM-L90
The module height influences the recognition rate of the symbol.
The module height is recommended to be set to 3-5 times the module width.
The recognition rate might decrease when the vertical size of the symbol is 5 mm {0.2"} or less.
The vertical size of the symbol can be confirmed by the transmission data of Function 082.