Epson TM-T88III

CONFIDENTIAL
Paper roll Kanji commands FS 2
Ver. 10.01 p. 499
FS 2
SETTING COMMAND
[Name] Define user-defined Kanji characters
[Format] ASCII FS 2 c1 c2 d1...dk
Hex 1C 32 c1 c2 d1...dk
Decimal 28 50 c1 c2 d1...dk
[Printers not featuring this command] TM-L60II, TM-P60
[Range] The ranges of c1 and c2 differ, depending on models and the character code system used. The ranges of c1
and c2 for each model are as follows.
0 ≤ d ≤ 255
TM-J2000/J2100, TM-T90, TM-L90:
k = 72 [Simplified Chinese model / Traditional Chinese model / Korean model]
k = 72 [Japanese model: Kanji Font A (24 × 24)
k = 60 [Japanese model: Kanji Font B (20 × 24)
k = 32 [Japanese model: Kanji Font C (16 × 16)
TM-T88III: k = 72
TM-U230, TM-U220, TM-U210, TM-U300A/B: k = 32
[Description] Defines the user-defined Kanji character pattern specified by the character codes ( c1 and c2 ) of the currently
selected Kanji font.
•
c1 specifies the first byte of a character code for a user-defined Kanji character.
Models
c1 c2
Japanese model (JIS code) c1 = 77H 21H ≤ c2 ≤ 7EH
Japanese model (SHIFT JIS code) c1 = ECH 40H ≤ c2 ≤ 7EH,
80H ≤ c2 ≤ 9EH
Simplified Chinese c1 = FEH A1H ≤ c2 ≤ FEH
Traditional Chinese c1 = FEH A1H ≤ c2 ≤ FEH
Korean c1 = FEH A1H ≤ c2 ≤ FEH
Kanji commands