Epson TM-T88III

CONFIDENTIAL
Paper roll Miscellaneous commands GS <
Ver. 10.01 p. 451
GS <
EXECUTING COMMAND
[Name] Initialize printer mechanism
[Format] ASCII GS <
Hex 1D 3C
Decimal 29 60
[Range] None
[Default] None
[Printers not featuring this command] TM-J2000/J2100, TM-T90, TM-T88III, TM-L90, TM-P60, TM-U230, TM-U220,
TM-U210, TM-U300A/B
[Description] Performs the label initialization performed at power-on.
[Recommended Functions]
This command is supported only by some printer models and may not be supported by future models.
GS ( A is recommended for initializing of label paper. GS ( A ( m = 64) can perform the same function as this
command.
[Notes]
■ This command is effective only when a thermal label is selected with the paper selection DIP switch.
■ Specifying the label paper differs, depending on the printer model.
[Model-dependent variations] TM-L60II
TM-L60II
With a serial interface, the paper selection DIP switch is SW 2-6.
With a parallel interface, the paper selection DIP switch is SW 1-7.
Program Example
PRINT #1, CHR$(&H1D);"<";
Miscellaneous commands
obsolete command
obsolete command