CONFIDENTIAL
Paper roll Mechanism control commands ESC m
Ver. 10.01 p. 370
ESC m
EXECUTING COMMAND
[Name] Partial cut (three points left uncut)
[Format] ASCII ESC m
Hex 1B 6D
Decimal 27 109
[Range] None
[Default] None
[Printers not featuring this command] TM-J2000/J2100, TM-T90, TM-T88III, TM-L90, TM-L60II, TM-P60, TM-U230,
TM-U210
[Description] Executes a partial cut of the roll paper.
[Recommended Functions]
This command is supported by some printer models but will not be supported by future printer models.
GS V is recommended for cutting paper. GS V <Function A> gives the same result as this command.
[Notes]
■ See GS V <Function A> for details.
■ The cutting shape depends on the specification of the mounted autocutter.
[Model-dependent variations] TM-U220
Mechanism control commands
obsolete command
obsolete command
To Next Page
Loading...
