CONFIDENTIAL
Paper roll Kanji commands FS !
Ver. 10.01 p. 487
FS !
SETTING COMMAND
[Name] Select print mode(s) for Kanji characters
[Format] ASCII FS !
n
Hex 1C 21
n
Decimal 28 33
n
[Printers not featuring this command] TM-L60II, TM-P60
[Range] 0 ≤
n
≤ 255
[Default]
n
= 0
[Description] Selects the character styles (double-height, double-width, and Kanji-underlined) together for multi-byte code
character as follows:
n:
Bit Function Binary Hexadecimal Decimal
0 Reserved Off 00 0
1 Reserved Off 00 0
2 Double-width canceled 0ff 00 0
Double-width selected On 04 4
3 Double-height canceled Off 00 0
Double-height selected On 08 8
4~6 Reserved Off 00 0
7 Kanji underline mode is turned off Off 00 0
Kanji underline mode is turned on On 80 128
To Next Page
Loading...
