Epson TM-T88III

CONFIDENTIAL
Paper roll Status commands GS a
Ver. 10.01 p. 316
GS a
EXECUTING + SETTING
[Name] Enable/disable Automatic Status Back (ASB)
[Format] ASCII GS a n
Hex 1D 61 n
Decimal 29 97 n
[Range] 0 ≤ n ≤ 255
[Default] TM-P60: n = 255
Other than above:
When DIP switch or memory switch (BUSY condition) is Off: n = 0
When DIP switch or memory switch (BUSY condition) is On: n = 2
[Printers not featuring this command] TM-U300A/B
[Description] Enables or disables basic ASB (Automatic Status Back) and specifies the status items to include, using n as
follows:
n:
Bit Binary Hex Decimal Function
0 0 00 0 Drawer kick-out connector status disabled.
... how to use
this table
1 01 1 Drawer kick-out connector status enabled.
1 0 00 0 Online/offline status disabled.
1 02 2 Online/offline status enabled.
2 0 00 0 Error status disabled.
1 04 4 Error status enabled.
3 0 00 0 Roll paper sensor status disabled.
1 08 8 Roll paper sensor status enabled.
4,5 0 00 0 Undefined.
Status commands