Epson TM-T88III

CONFIDENTIAL
Paper roll Print position commands ESC W
Ver. 10.01 p. 175
ESC W
SETTING COMMAND
[Name] Set print area in page mode
[Format] ASCII ESC W xL xH yL yH dxL dxH dyL dyH
Hex 1B 57 xL xH yL yH dxL dxH dyL dyH
Decimal 27 87 xL xH yL yH dxL dxH dyL dyH
[Range] 0 ≤ xL , xH , yL , yH , dxL , dxH , dyL , dyH ≤ 255
(except for dxL = dxH = 0 or dyL = dyH = 0)
[Default] Horizontal logical origin and vertical logical origin= 0
xL = 0, xH = 0, yL = 0, yH = 0
Print area width and print area height = entire printable area
TM-J2000 (single-color printing model):
dxL = 0, dxH = 2, dyL = 128, dyH = 6 (when paper width is set to 82.5 mm)
dxL = 224, dxH = 1, dyL = 240, dyH = 6 (when paper width is set to 76 mm)
dxL = 176, dxH = 1, dyL = 176, dyH = 7 (when paper width is set to 69.5 mm)
dxL = 104, dxH = 1, dyL = 64, dyH = 9 (when paper width is set to 57.5 mm)
TM-J2100 (two-color printing model):
dxL = 0, dxH = 2, dyL = 0, dyH = 5 (when paper width is set to 82.5 mm)
dxL = 224, dxH = 1, dyL = 80, dyH = 5 (when paper width is set to 76 mm)
dxL = 176, dxH = 1, dyL = 240, dyH = 5 (when paper width is set to 69.5 mm)
dxL = 104, dxH = 1, dyL = 32, dyH = 7 (when paper width is set to 57.5 mm)
TM-T90: [Other than Japanese model]
dxL = 0, dxH = 2 (when paper width is set to 80 mm)
dxL = 128, dxH = 1 (when paper width is set to 60 mm)
dxL = 104, dxH = 1, dyL = 126, dyH = 6 (when paper width is set to 58 mm)
[Japanese model]
dxL = 64, dxH = 2 (when paper width is set to 80 mm)
dxL = 180, dxH = 1 (when paper width is set to 60 mm)
dxL = 164, dxH = 1, dyL = 196, dyH = 5 (when paper width is set to 58 mm)
TM-T88III: dxL = 0, dxH = 2, dyL = 126, dyH = 6 (when paper width is set to 80 mm)
dxL = 104, dxH = 1, dyL = 126, dyH = 6 (when paper width is set to 58 mm)
Print position commands