Epson TM-T88III

CONFIDENTIAL
Paper roll Character commands ESC ?
Ver. 10.01 p. 121
Program example for ESC %, ESC &, and ESC ?
TM-U210
This command is effective only when the receive buffer capacity is 40 bytes (when DIP switch 1-2
is ON).
Program Example Program Example (continued)
PRINT #1, CHR$(&H1B);"&";CHR$(2);"AC";
PRINT #1, CHR$(9);
FOR i=1 TO 2*9
READ d: PRINT #1, CHR$(d);
NEXT i
PRINT #1, CHR$(9);
FOR i=1 TO 2*9
READ d: PRINT #1, CHR$(d);
NEXT i
PRINT #1, CHR$(10);
FOR i=1 TO 2*10
READ d: PRINT #1, CHR$(d);
NEXT i
PRINT #1, CHR$(&H1B);"%";CHR$(0); ← Select resident character
PRINT #1, "A B C D E"; CHR$(&HA);
PRINT #1, CHR$(&H1B);"%";CHR$(1); ← Select user-defined character
PRINT #1, "A B C D E"; CHR$(&HA):
PRINT #1, CHR$(&H1B);"?";"A"; ← Cancel the user-defined character
PRINT #1, "A B C D E"; CHR$(&HA);
DATA &H18,&H00,&H00,&H00,&H3C,&H00,&H00,&H00
DATA &H7E,&H00,&H00,&H00,&H3C,&H00,&H00,&H00
DATA &H18,&H00
DATA &H18,&H00,&H00,&H00,&H24,&H00,&H00,&H00
DATA &H42,&H00,&H00,&H00,&H24,&H00,&H00,&H00
DATA &H18,&H00
DATA &H00,&H00,&H10,&H00,&H20,&H00,&H5F,&H00
DATA &H00,&H00,&H81,&H00,&H00,&H00,&H5F,&H00
DATA &H20,&H00,&H10,&H00
Print Sample
ABCDE ← Characters from resident character set
♦ ◊× DE ← Characters from user-defined character set
A
◊× DE ← Characters from user-defined character set (cancel one character)