Epson TM-T88III

CONFIDENTIAL
Paper roll Customize commands GS ( E
Ver. 10.01 p. 600
GS ( E pL pH fn a d1 d2 <Function 7>
[Name] Copy the user-defined page
[Format] ASCII GS ( E pL pH fn ad1d2
Hex 1D 28 45 04 00 07 a d1 d2
Decimal 294069 2 0 7 a d1 d2
[Range] ( pL + pH × 256) = 4 ( pL = 4, pH = 0)
fn = 7
d1 = 30, 31
d2 = 30, 31 ( d1 ≠ d2 )
TM-J2000/J2100, TM-T90, TM-L90: a = 10, 12 (Other than Japanese model)
a = 12, 17, 18 (Japanese model)
TM-P60: a = 12, 17, 18
[Description] Copies the data in the user-defined code page.
• Font number is specified by a .
• Copy operation is specified by d1 , d2 .
[Notes]
■ This function works in user setting mode.
a User defined code page
Number of
horizontal dots
Number of
vertical dots
10 Font configuration 9 × 14 (page 255) 9 17
12 Font configuration 12 × 24 (page 255) 12 24
17 Font configuration 8 × 16 (page 255) 8 16
18 Font configuration 10 × 24 (page 255) 10 24
d1 d2 Copy operation
31 30 Copy the font number data ( a ) from the storage area into the work area
30 31 Copy the data from the work area into the storage area specified by font number
(
a )