Epson TM-T88III Programming Guide

CONFIDENTIAL
Paper roll Customize commands GS ( M
Ver. 10.01 p. 631
GS ( M p L p H fn m <Function 1>
[Name] Save the setting values from the work area into the storage area
[Format] ASCII GS ( M pL pH fn m
Hex 1D 28 4D 02 00 fn m
Decimal 294077 2 0fnm
[Range] ( pL + pH × 256) = 2, ( pL = 2, pH = 0), fn = 1, 49
TM-J2000/J2100, TM-T90, TM-L90, TM-P60: m = 1, 49
[Description] Saves the setting values of commands listed in the tables on the previous pages and stored in the work area in
the storage area specified by m .
[Notes]
■ The values that have been already stored in the storage area specified by m are cleared by this command.
■ The values in the work area are not changed.
■ The values saved in the storage area are loaded to the work area by the following:
• Executed by Function 2 with the storage area specified.
• Initialized when an autoload process has been specified by Function 3.
■ The values affected by this command are different, depending on the printer models. See model-
dependent variations for details.
■ When multiple applications use the storage area at the same time, if this command is executed, the values
saved by other applications are deleted. Be sure to take this into account when using this command.

Epson TM-T88III Specifications

General

Brand	Epson
Model	TM-T88III
Category	Printer
Language	English