Epson TM-T88III Programming Guide

CONFIDENTIAL
Paper roll Customize commands FS g 1
Ver. 10.01 p. 551
FS g 1
SETTING COMMAND
[Name] Write to NV user memory
[Format] ASCII FS g 1 m a1 a2 a3 a4 nL nH d1...dk
Hex 1C 67 31 m a1 a2 a3 a4 nL nH d1...dk
Decimal 28 103 49 m a1 a2 a3 a4 nL nH d1...dk
[Printers not featuring this command] TM-J2000/J2100, TM-T90, TM-L90 TM-L60II, TM-P60, TM-U230, TM-U220,
TM-U210, TM-U300A/B
[Range] m = 0
0 ≤ ( a1 + a2 × 256) + a3 × 65536) + ( a4 × 16777216) ≤ 1023)
1 ≤ ( nL + nH × 256) ≤ 1024
32 ≤ d ≤ 255
k = ( nL + nH × 256)
[Description] Stores the data to NV user memory.
• a1 , a2 , a3 , and a4 specify the stored data starting address as ( a1 + a2 × 256 + a3 × 65536 + a4 ×
16777216).
• nL and nH specifies the number of stored data bytes ( nL + nH × 256).
• d specifies the stored data.
• k indicates the number of stored data. k is an explanation parameter; therefore, it does not need to be
transmitted.
[Recommended Functions]
■ This is an unrecommended command. It is supported by some printer models but will not be supported by
future models.
■ GS ( C is recommended to write to NV user memory. Operation of GS ( C offers the following
improvements:
• Data can be controlled by the record.
• Each record can be redefined, retrieved, or deleted by keycode.
• Memory can be used efficiently because the printer controls the data.
• The amount of definition area remaining can be confirmed.
obsolete command
obsolete command

Epson TM-T88III Specifications

General

Brand	Epson
Model	TM-T88III
Category	Printer
Language	English