Epson TM-T88III

CONFIDENTIAL
Paper roll Miscellaneous commands ESC =
Ver. 10.01 p. 408
ESC =
SETTING COMMAND
[Name] Select peripheral device
[Format] ASCII ESC = n
Hex 1B 3D n
Decimal 27 61 n
[Range] 1 ≤ n ≤ 3
[Default] TM-J2000/J2100: Serial interface model:
n = 1 When [memory switch [DM-D (customer display) connection] is OFF.
n = 2 When [memory switch [DM-D (customer display) connection] is ON.
Parallel interface model:
n = 1
TM-T90, TM-T88III, TM-L90, TM-L60II, TM-P60, TM-U230, TM-U220, TM-U210: n = 1
[Printers not featuring this command] TM-U300A/B
[Default] Selects the device to which the host computer transmits data, using n as follows:
[Notes]
■ When the printer is disabled, it ignores all received data and commands with the exception of ESC = and
real-time commands.
■ If ASB is enabled when the printer is disabled by this command, the printer transmits the ASB status
message whenever the status changes. See the description of GS a for ASB function.
■ Settings of this command are effective until ESC @ is executed, the printer is reset, or the power is turned
off.
■ The default value when the power supply is turned on and when ESC @ is executed might be different.
• The default value when the power supply is turned on becomes the [default value].
n Function
1,3 Enables printer.
2 Disables printer.
Miscellaneous commands