Epson TM-T88III

CONFIDENTIAL
Paper roll Bit-image commands GS ✻
Ver. 10.01 p. 279
GS ✻
SETTING COMMAND
[Name] Define downloaded bit image
[Format] ASCII GS ✻ x y d1 ... d ( x × y × 8)
Hex 1D 2A x y d1 ... d ( x × y × 8)
Decimal 29 42 x y d1 ... d ( x × y × 8)
[Range] TM-J2000/J2100: 1 ≤ x ≤ 255
1 ≤ y ≤ 255 (1 ≤ x × y ≤ 3072)
0 ≤ d ≤ 255
k = x × y × 8
TM-T90: 1 ≤ x ≤ 255 (1 ≤ x × y ≤ 1536)
1 ≤ y ≤ 48 [Except for Japanese model]
1 ≤ y ≤ 46 [Japanese model]
0 ≤ d ≤ 255
k = x × y × 8
TM-T88III, TM-L60II:1 ≤ x ≤ 255
1 ≤ y ≤ 48 (1 ≤ x × y ≤ 1536)
0 ≤ d ≤ 255
k = x × y × 8
TM-L90: 1 ≤ x ≤ 255
1 ≤ y ≤ 46 (1 ≤ x × y ≤ 1536)
0 ≤ d ≤ 255
k = x × y × 8
[Default] None
[Printers not featuring this command] TM-P60, TM-U230, TM-U220, TM-U210, TM-U300A/B
[Description] Defines the downloaded bit image in the downloaded graphic area.
• x specifies the number of bytes in horizontal direction as x bytes.
• y specifies the number of bytes in vertical direction as y bytes.
•
d defines the bit image data (column format).
Bit-image commands
obsolete command
obsolete command