Epson TM-T88III

CONFIDENTIAL
Paper roll Kanji commands FS ?
Ver. 10.01 p. 508
FS ?
SETTING COMMAND
[Name] Cancel user-defined Kanji characters
[Format] ASCII FS ? c1 c2
Hex 1C 3F c1 c2
Decimal 28 63 c1 c2
[Printers not featuring this command] TM-T90, TM-T88III, TM-L90, TM-L60II, TM-P60, TM-U230, TM-U300A/B
[Range] The ranges of c1 and c2 differ, depending on specifications and the character code system used. The ranges of
c1 and c2 for each model are as follows.
[Description] Deletes the user-defined Kanji character pattern specified by the character codes ( c1 and c2 ) of the currently
selected Kanji font.
• c1 specifies the first byte of a character code for a user-defined Kanji character.
• c2 specifies the second byte of a character code for a user-defined Kanji character.
[Notes]
■ This command is effective only for Japanese, Simplified Chinese, Traditional Chinese, or Korean models.
■ After user-defined Kanji characters are canceled, a space is printed.
■ The foreign character pattern of the selected Kanji character font is deleted. Use function 48 of FS ( A to
specify the Kanji character font.
Models c1 c2
Japanese model (JIS code) c1 = 77H 21H ≤ c2 ≤ 7EH
Japanese model (SHIFT JIS code) c1 = ECH 40H ≤ c2 ≤ 7EH,
80H ≤ c2 ≤ 9EH
Simplified Chinese c1 = FEH A1H ≤ c2 ≤ FEH
Traditional Chinese c1 = FEH A1H ≤ c2 ≤ FEH
Korean c1 = FEH A1H ≤ c2 ≤ FEH
Kanji commands