Epson TM-T88III

CONFIDENTIAL
Paper roll Customize commands GS ( E
Ver. 10.01 p. 576
GS ( E pL pH fn [a1 b18...b11]...[ak nk8 nk1] <Function 3>
[Name] Change the memory switch
[Format] ASCII GS ( E pL pH fn [a1 b18...b11]...[ak nk8 nk1]
Hex 1D 28 45 pL pH 03 [a1 b18...b11]...[ak nk8 nk1]
Decimal 294069 pL pH 3 [a1 b18...b11]...[ak nk8 nk1]
[Range] 10 ≤ ( pL + pH × 256) ≤ 65530 (0 ≤ pL ≤ 255, 0 ≤ pH ≤ 255: ( pL + pH × 256) = 9 × k + 1)
fn = 3
b = 48, 49, 50
1 ≤ k ≤ 7281
TM-J2000/J2100, TM-T90, TM-L90: a = 1, 2, 8
TM-P60: a = 8
TM-U220: a = 2, 8
[Default] TM-J2000/J2100: memory switch 2-1 and 2-2 are ON ( b = 49) and the others are OFF ( b = 48).
TM-T90: memory switches 2-1 and 2-2 and 8-8 are ON ( b = 49), and others are OFF ( b = 48).
TM-P60: memory switches 8-1 ~ 8-5 are ON ( b = 49), and others are OFF ( b = 48).
TM-U220:all memory switches are OFF ( b = 48).
[Description] Changes the memory switch specified by a to the values specified by b .
■ When a = 1, memory switch 1 is set as follows:
b Function
48 Set to OFF.
49 Set to ON.
50 Does not change the memory switch.
Msw Setting value ( b ) Function
1-1 48 Does not transmit the power ON notice
49 Transmits the power ON notice when processing an initialization