Epson TM-T88III

CONFIDENTIAL
Paper roll Kanji commands FS W
Ver. 10.01 p. 507
FS W
SETTING COMMAND
[Name] Turn quadruple-size mode on/off for Kanji characters
[Format] ASCII FS W n
Hex 1C 57 n
Decimal 28 87 n
[Printers not featuring this command] TM-L60II, TM-P60
[Range] 0 ≤ n ≤ 255
[Default] n = 0
[Description] Turns quadruple-size mode on or off for multi-byte code character.
• When the LSB of n is 0, quadruple-size mode is turned off and normal size is specified.
• When the LSB of n is 1, quadruple-size mode is turned on.
[Notes]
■ Settings of this command affect multilingual (except Thai) characters and user-defined characters.
■ When a double-height mode is specified, a character is enlarged based on a baseline of the character and
when a double-width mode is specified, a character is enlarged based on the left side of the character.
■ Settings of this command are effective until FS ! is executed, GS ! is executed, ESC @ is executed, the
printer is reset, or the power is turned off.
Program Example
PRINT #1, CHR$(&H1C);”C”;CHR$(0); ← Select JIS code system
PRINT #1, CHR$(&H1C);”&”;
PRINT #1, CHR$(&H1C);”W”;CHR$(0); ←
Cancel quadruple-size mode
PRINT #1, CHR$(&H34);CHR$(&H41);
PRINT #1, CHR$(&H3B);CHR$(&H7A);CHR$(&HA);
PRINT #1, CHR$(&H1C);”W”;CHR$(1); ←
Specify quadruple-size mode
PRINT #1, CHR$(&H34);CHR$(&H41);
PRINT #1, CHR$(&H3B);CHR$(&H7A);CHR$(&HA);
PRINT #1, CHR$(&H1C);”.”;
Print Sample
← Normal size
← Quadruple size
Kanji commands