Epson TM-T88III

CONFIDENTIAL
Paper roll Miscellaneous commands GS g 2
Ver. 10.01 p. 475
GS g 2
EXECUTING COMMAND
[Name] Transmit maintenance counter
[Format] ASCII GS g 2 m nL nH
Hex 1D673200 nL nH
Decimal 29 103 50 0 nL nH
[Printers not featuring this command] TM-T88III, TM-L60II, TM-U230, TM-U220, TM-U210, TM-U300A/B
[Range] m = 0
TM-J2100 (two-color): 30 ≤ ( nL + nH × 256) ≤ 34,( nL + nH × 256) = 50, 70
158 ≤ ( nL + nH × 256) ≤ 162,( nL + nH × 256) = 178, 198
TM-J2000 (single-color): ( nL + nH × 256) = 30, 31, 33, 34, 50, 70
( nL + nH × 256) = 158, 159, 161, 162, 178, 198
TM-T90, TM-L90, TM-P60: ( nL + nH × 256) = 20, 21, 50, 70
( nL + nH × 256) = 148, 149, 178, 198
[Description] Transmits the value of the maintenance counter specified by the number.
( nL + nH × 256) Type Maintenance counter
10~19 Resettable Serial impact head
20~29 Resettable Thermal head
30~39 Resettable Ink jet head
40~49 Resettable Shuttle head
50~59 Resettable Devices that conform to the normal specification
60~69 Resettable Option devices
70~79 Resettable Time
138~147 Accumulation Serial impact head
148~157 Accumulation Thermal head
158~167 Accumulation Ink jet head
168~177 Accumulation Shuttle head
Miscellaneous commands