Epson TM-T88III

CONFIDENTIAL
Paper roll Miscellaneous commands GS ( K
Ver. 10.01 p. 449
GS ( K <Function 97>
[Name] Select the number of parts for the thermal head energizing
[Format] ASCII GS ( K pL pH fn m
Hex 1D 28 4B 02 00 61 m
Decimal 294075 2097m
[Range] ( pL + pH × 256) = 2 ( pL = 2, pH = 0)
fn = 97
TM-T90, TM-L90:0 ≤ m ≤ 4, 48 ≤ m ≤ 52
[Default] m = 0
[Description] Selects the number of parts for the thermal head energizing which m specifies.
• The specification of each thermal head energizing differs, depending on the printer model. See model-
dependent variations.
[Notes]
■ When the standard mode is selected, all the data in a line is printed with the same setting.
■ When the page mode is selected, all the data printed collectively by FF or ESC FF is printed with the same
setting.
[Model-dependent variations] TM-J2000/J2100, TM-L90, TM-T90, TM-P60
m Function
0, 48 Setting value of GS(E Function 5 customize value ( a = 97).
1, 49 One-part energizing.
2, 50 Two-part energizing.
3, 51 Three-part energizing.
4, 52 Four-part energizing.