Epson TM-T88III Programming Guide

CONFIDENTIAL
Paper roll Miscellaneous commands GS ( K
Ver. 10.01 p. 447
GS ( K <Function 50>
[Name] Select the print speed
[Format] ASCII GS ( K pL pH fn m
Hex 1D 28 4B 02 00 32 m
Decimal 294075 2050m
[Range] ( pL + pH × 256) = 2 ( pL = 2, pH = 0)
fn = 50
TM-T90:0 ≤ m ≤ 11 48 ≤ m ≤ 57 (Japanese model)
0 ≤ m ≤ 9 48 ≤ m ≤ 57 (Other than Japanese model)
TM-L90:0 ≤ m ≤ 9 48 ≤ m ≤ 57
[Default] m = 0
[Description] Selects the print speed by m .
• The specification of each print speed differs, depending on the printer model. See model-dependent
variations.
[Notes]
■ The set value of this function specifies the print speed when operating under proper conditions. It may be
slower than the set print speed temporarily depending on conditions such as the operation environment
and the print duty.
m Function
0, 48 Setting value of GS(E Function 5 customize value ( a = 6)
1, 49 Print speed 1 (The lowest speed: Slowly).
2, 50 Print speed 2.
: :
8, 56 Print speed 8.
9, 57 Print speed 9
10 Print speed 10
11 Print speed 11

Epson TM-T88III Specifications

General

Brand	Epson
Model	TM-T88III
Category	Printer
Language	English