Epson TM-T88III

CONFIDENTIAL
Paper roll Kanji commands FS ( A
Ver. 10.01 p. 492
FS ( A
SETTING COMMAND
[Name] Select Kanji character style(s)
[Printers not featuring this command] TM-T88III, TM-L60II, TM-P60, TM-U230, TM-U220, TM-U210,TM-U300A/B
[Description] Selects the multi-byte code character style.
• Function code fn specifies the function.
• pL , pH specifies ( pL + pH × 256) as the number of bytes after pH ( fn and [parameters] ).
The [parameters] are described in each function.
[Notes]
■ This command is specified function by function code ( fn ). Operation details are different depending on
function.
■ Settings of this command affect multilingual (except Thai) characters and user-defined characters.
■ Settings of this command are effective until it is redefined, ESC @ is executed, the printer is reset, or the
power is turned off.
■ This command does not affect graphics, bit image, bar code, and two-dimension code.
fn Function No. Function name
48 Function 48 Select Kanji character font
Program Example
PRINT #1, CHR$(&h1C);"C";CHR$(0); ← Select JIS code system
PRINT #1, CHR$(&h1C);"&";
PRINT #1, CHR$(&h1C);"(A";CHR$(2);CHR$(0);CHR$(48);CHR$(48); ← <Function 48>
PRINT #1, CHR$(&h34);CHR$(&h41);CHR$(&h3B);CHR$(&h7A);CHR$(&hA);
PRINT #1, CHR$(&h1C);"(A";CHR$(2);CHR$(0);CHR$(48);CHR$(50); ← <Function 48>
PRINT #1, CHR$(&h34);CHR$(&h41);CHR$(&h3B);CHR$(&h7A);CHR$(&hA);
PRINT #1, CHR$(&h1C);".";
Print Sample
Kanji commands