Epson TM-T88III

CONFIDENTIAL
Paper roll Customize commands GS ( E
Ver. 10.01 p. 616
GS ( E pL pH fn sa ; sb ; sc ; sd ; se ; sf ; sg ; sh; <Function 49>
[Name] Set the paper layout
[Format] ASCII GS ( E p L p H fn sa ; sb ;sc;sd;se;sf;sg; sh ;
Hex 1D 28 45 p L p H 31 sa 3B sb 3B sc 3B sd 3B se 3B sf 3B sg 3B sh 3B
Decimal294069 p L p H 49 sa 59 sb 59 sc 59 sd 59 se 59 sf 59 sg 59 sh 59
[Range] 9 ≤ ( pL + pH × 256) ≤ 36 (9 ≤ pL ≤ 36, pH = 0)
fn = 49
TM-L90: sa = “48”, “49”, “64”
“135” ≤ sb ≤ “3000”
“25” ≤ sc ≤ “100“
“0” ≤ sd ≤ “3000”
“0” ≤ se ≤ “3000”
“38” ≤ sf ≤ “3000“
“27” ≤ sg ≤ “507“ ( sa = “48” or “49”)
“47” ≤ sg ≤ “507“ ( sa = “64”)
“240” ≤ sh ≤ “720“ ( sa = “48” or “49”)
“240” ≤ sg ≤ “700“ ( sa = “64”)
Some combinations of parameters do not work. See the model-dependent variation section for
details.
[Default] Nothing is set.
[Description] Sets the paper layout (origin of layout, layout in the vertical direction and horizontal direction) in the NV
memory.
• Sets the origin of layout by sa .
sa Origin of layout Paper type
48 None (does not use the layout) Receipt (without black
mark), continuous label
49 Top of a black mark Paper with black mark
64 Bottom of a label Label paper (die-cut label)