Epson TM-T88III

CONFIDENTIAL
Paper roll Two-dimension code commands GS ( k
Ver. 10.01 p. 517
GS ( k <Function 066>
[Name] PDF417: Set the number of rows
[Format] ASCII GS ( k pL pH cn fn n
Hex 1D 28 6B 03 00 30 42 n
Decimal 2940107 3 0 48 66 n
[Range] ( pL + pH × 256) = 3 ( pL =3, pH =0)
cn = 48
fn = 66
n = 0, 3 ≤ n ≤ 90
[Default] n = 0
[Description] Sets the number of rows for PDF417.
• When n = 0 specifies automatic processing.
• When n is not 0, sets the number of rows to n rows.
[Notes]
■ Settings of this function affect the processing of Functions 081 and 082.
■ When automatic processing ( n = 0) is specified, the maximum number of rows is 90.
■ When automatic processing ( n = 0) is specified, the number of rows is calculated by the print area when
processing Functions 081, 082, and module height (Function 068).
■ Settings of this function are effective until ESC @ is executed, the printer is reset, or the power is turned
off.