Epson TM-T88III Programming Guide

CONFIDENTIAL
Paper roll Line spacing commands ESC 2
Ver. 10.01 p. 95
ESC 2
SETTING COMMAND
[Name] Select default line spacing
[Format] ASCII ESC 2
Hex 1B 32
Decimal 27 50
[Range] None
[Default] None
[Printers not featuring this command] TM-P60
[Description] Sets the line spacing to the “default line spacing.”
[Notes]
■ The line spacing can be set independently in standard mode and in page mode.
• In standard mode this command sets the line spacing of standard mode.
• In page mode this command sets the line spacing of page mode.
■ Selected line spacing is effective until ESC 3 is executed, ESC @ is executed, the printer is reset, or the
power is turned off.
[Model-dependent variations] TM-U230, TM-T88III, TM-L60II, TM-L90, TM-J2000/J2100, TM-T90, TM-U210,
TM-U220, TM-U300A/B
See program example and print sample for ESC 2 and ESC 3.
TM-J2000/J2100
The default line spacing is about 4.23 mm {1/6 inch}, which is equivalent to 30 dots.
TM-T90
The default line spacing except Japanese characters is about 4.23 mm {1/6 inch}, which is
equivalent to 30 dots.
The default line spacing for Japanese characters is about 3.75 mm {30/203 inch}, which is
equivalent to 30 dots.
Line spacing commands

Epson TM-T88III Specifications

General

Brand	Epson
Model	TM-T88III
Category	Printer
Language	English