Epson TM-T88III Programming Guide

CONFIDENTIAL
Paper roll Bit-image commands GS ( L GS 8 L
Ver. 10.01 p. 229
GS ( L pL pH m fn <Function 50 >
[Name] Print the graphics data in the print buffer.
[Format] ASCII GS ( L pL pH mfn
Hex 1D 28 4C 02 00 30 fn
Decimal 29 40 76 2 0 48 fn
[Range] ( pL + pH × 256) = 2 ( pL = 2, pH = 0)
m = 48
fn = 2, 50
[Description] Prints the buffered graphics data stored by the process of GS(L <Function 112 or 113>.
[Notes]
■ The printer cannot print when there is no graphics data stored in the print buffer.
■ Functions 112 and 113 of this command are used to store graphics data in the print buffer.
■ This function cannot be used when the page mode is enabled.
■ Feeds the paper the required distance when printing graphics data, regardless of line feed pitch settings
entered using the Set line feed command.
■ Moves print position to the left side of the print area after printing of graphics data is completed. The
printer then enters the “beginning of the line” or “no data in print buffer” state.

Epson TM-T88III Specifications

General

Brand	Epson
Model	TM-T88III
Category	Printer
Language	English