Epson TM-T88III

CONFIDENTIAL
Paper roll Miscellaneous commands ESC ( A
Ver. 10.01 p. 398
ESC ( A
EXECUTING + SETTING
[Name] Control beeper tones
[Printers not featuring this command] TM-J2000/J2100, TM-T90, TM-T88III, TM-L90, TM-L60II, TM-U210, TM-U220,
TM-U300A/B
[Description] Performs the various tasks related to the control of the beeper (listed in the table below).
• Function code ( fn ) specifies the function.
• pL , pH specifies ( pL + pH × 256) as the number of bytes after pH ( fn and [parameters] ).
Description of the [parameters] is described in each function.
[Notes]
■ The functions of this command are determined by the ( fn ) setting. Actual command operation varies
according to function.
[Model-dependent variations] TM-P60, TM-U230
TM-P60
The printer supports function 48.
fn Function No. Function name
48 Function 48 Beeps integrated beeper
97 Function 97 Beep integrated beeper in TM-U230 models.
98 Function 98 Set integrated beeper when offline factors occur in TM-U230 models.
99 Function 99 Set integrated beeper when except offline factors occur in TM-U230
models.
Program Example 1
PRINT #1, CHR$(&H1B);"(A";CHR$(4);CHR$(0);CHR$(48);CHR$(49);CHR$(3);CHR$(15); ← <Function 48>
Miscellaneous commands