CONFIDENTIAL
Paper roll Bit-image commands GS /
Ver. 10.01 p. 282
GS /
EXECUTING COMMAND
[Name] Print downloaded bit image
[Format] ASCII GS /
m
Hex 1D 2F
m
Decimal 29 47
m
[Range] 0 ≤
m
≤ 3, 48 ≤
m
≤ 51
[Default] None
[Printers not featuring this command] TM-P60, TM-U230, TM-U220, TM-U210, TM-U300A/B
[Description] Prints downloaded bit image using the process of GS ✻and using the mode specified by
m
, as follows:
[Recommended Functions]
This command is supported only by some printer models and may not be supported by future models.
It is recommended that NV graphics function (GS ( L GS 8 L: <Function 52> and <Function 80> ~
<Function 85>) be used because it offers the following additional features:
• Multiple logo data and mark data can be specified. (except for some models)
• Data can be controlled by key code.
• Redefining or deleting the same data is possible for each key code.
• Color can be specified for the definition data.
• Data can be defined by raster format.
• The remaining capacity of definition area can be confirmed.
m
Mode Scaling for horizontal Scaling for vertical
0, 48 Normal × 1 × 1
1, 49 Double-width × 2 × 1
2, 50 Double-height × 1 × 2
3, 51 Quadruple × 2 × 2
Bit-image commands
obsolete command
obsolete command
To Next Page
Loading...
Need help?
General