CONFIDENTIAL
Paper roll Print commands FF (in page mode)
Ver. 10.01 p. 74
FF (in page mode)
EXECUTING COMMAND
[Name] Print and return to standard mode (in page mode)
[Format] ASCII FF
Hex 0C
Decimal 12
[Default] None
[Range] None
[Printers not featuring this command] TM-U230, TM-U220, TM-U210, TM-U300A/B
[Description] In page mode, prints all the data in the print buffer collectively and switches from page mode to standard
mode.
[Notes]
■ This command is enabled only in page mode. See FF (in standard mode) to use this command in standard
mode. Page mode can be selected by ESC L or FS L.
■ The data is deleted in the print area after being printed.
■ This command returns the values set by ESC W to the default values.
■ The value set by ESC T is maintained.
■ After printing, the print position moves to the beginning of the line. When a left margin is set, the
position of the left margin is the beginning of the line.
Print commands
To Next Page
Loading...
